The Noisecom 60 GHz Noise Figure test set has 4 separate systems designed to perform Y-factor noise figure measurements using a high performance Spectrum Analyzer or a dedicated receiver. Each system contains a highly stable V-band noise source, isolator(s), optional waveguide to coaxial transitions and an optional pre-amplifier for use with a spectrum analyzer. The two standard calibration tables have ENR data points at 1 GHz intervals.* System ENR is measured before the DUT connector and at the final output stage allowing for pre-test calibration of the system.
Noisecom is a leader of RF and microwave noise sources for signal jamming and impairment, reference level comparison and calibration, receiver robustness testing, and jitter injection. Electronic noise generation devices from Noisecom come in a variety of product types including, noise diodes, built-in-test modules (BITE), calibrated noise sources, jitter sources, cryogenic noise standards and programmable instruments. Calibrated noise sources are available from audio to millimeter wavelengths in coaxial or waveguide modules. Programmable instruments are highly configurable and able to generate precise Carrier-to-Noise, Signal-to-Noise and broadband white noise. Noisecom products are customizable to meet the unique needs of challenging applications and can be designed for high power, high crest factor, and specific filter responses with a wide selection of input and output options.
